Understanding & fixing slow iPhone or iPad backups
Your first backup with iMazing will always take the longest, sometimes up to 1-2 hours or more if you have a high capacity device full of data. Subsequent backups are incremental and will be completed in much less time, usually just minutes.
iMazing employs the exact same, Apple-engineered backup mechanism as iTunes (Windows and older macOS versions) and Finder (newer macOS versions). The time it takes for your computer to complete an iMazing backup is identical to an iTunes- or Finder-triggered backup.
If your backup is taking unusually long, this guide will help you troubleshoot the possible causes. This includes:
- Backup is stuck at a specific percentage and is not progressing for a very long time
- Error message at a specific percentage
- Backup restarts on its own
- Extremely long total backup times (but backup completes successfully)
The following factors can significantly affect backup times:
- Connection type (USB or Wi-Fi)
- Backup location & backup storage medium (internal, external, NAS/network; mechanical vs SSD)
- Available space on the device being backed up & at the backup location
- Files modified during the backup process
- Third-party software
- Apple’s USB Lightning port connector is limited to 480Mbps (USB 2.0 speed) regardless of whether it is connected to a USB-A or USB-C port.
- USB-C powered iPad models will connect at 5Gbps when connected to a computer’s USB-C port. If your iPad and computer both have USB-C ports, we strongly recommend always connecting via USB-C.
- Wi-Fi connections between a Lightning-connected Apple device and computer can sometimes be faster than USB, but that is dependent on many factors unique to the network you’re on (see below).
- The type and speed of Wi-Fi connection (not always easy to determine)
- Your device’s specific connection speed to the Wi-Fi access point (also not always easy to determine)
- Your device’s physical location relative to the Wi-Fi access point and whether the device is being moved around during any process
- Your computer’s specific connection speed to the Wi-Fi access point, as well as its relative position to the Wi-Fi access point and movement
- If connected via Wi-Fi, try USB
- If connected via USB, try another USB port:
- Ensure the best connection by connecting your iPhone, iPad, or iPod directly to a USB port on the computer (not through a keyboard, dock, or hub)
- If you’re backing up to an external USB drive, that drive should also be directly connected to the computer (if possible)
- If you must use a dock or hub to connect your Apple device or destination drive, verify that those USB connections are at “full speed”
- Check your cable - It is always better to use the original cable that came with your phone and/or hard drive. Cheap alternatives may have lower performance.
If you would like to backup via Wi-Fi, please ensure that:
- You run at least the first backup via USB
- Your Wi-Fi router supports Wi-Fi 4 (802.11n), but preferably Wi-Fi 5 (802.11ac) or Wi-Fi 6 (802.11ax)
- Your computer is either connected via Ethernet to the router, or located in close proximity to the Wi-Fi access point (and also connecting at Wi-Fi 4 or faster)
- Your device is located in close proximity to your router
- If backing up to a network drive or NAS, make sure the connection between thet network drive or NAS and router is also strong, or alternatively connect your network drive or NAS directly to your Wi-Fi access point or router with an Ethernet cable
2. Backup location considerations
Backing up to a network drive, NAS, or Apple Time Capsule can take significantly longer backing up to a local drive, whether internal or external.
If your backup to a network drive is not finishing:
- Connect your network drive directly to your computer via USB for the first backup (if possible)
- Ensure that no other backups are simultaneously occurring (pause all third-party backup software on the computer, including Time Machine if you’re on a Mac)
Avoid these backup locations:
- Do not use cloud storage (OneDrive, Google Drive, Dropbox, etc.), SD cards, or USB flash/thumb drives as your backup location. These have either low read/write speed or connection issues that will corrupt the backup.
- We also advise against using Western Digital (WD) My Cloud Home for backup. These are extremely inefficient NAS drives that can generate a lot of issues when backing up iOS devices. You should not back up your iOS devices to such drives.
3. Available space on the device being backed up
If your iPhone, iPad, or iPod has very little free space left (less than 5-7% of the total device capacity) it can take much longer to back up. Free up some space on your device, then try again.
- The storage report found on the iOS or iPadOS device under Settings > General > iPhone/iPad Storage does not include purgeable space. Please make sure to check the device storage with iMazing:
iMazing Interface - Disk Usage
Available space on the backup location:
The performance of an external drive can diminish when free space is less than 5-10% of the drive’s total capacity, and will be further reduced as available capacity approaches 0%. Please free up space if needed and try again.
4. Files modified on device during the backup process
If your device is taking a long time to back up, previously backed up files might have already changed (during the backup) and the backup process on the device will start over for those items. iOS is in charge of this process, not iMazing, which is a vital part of ensuring a backup's coherence and integrity.
To prevent file modifications during the backup:
- Put the device in Airplane Mode and disable Wi-Fi and Bluetooth
- Do not use the device while it is being backed up
5. Third-party software & security solutions
Many kinds of third-party software can slow backups:
- Security software: Antivirus, firewall, VPN, or even ad-blockers can slow or interrupt the backup process, sometimes without triggering any error message (either by iMazing or with the software causing the issue). Please try to quit or pause these kinds of utilities if you are encountering backup issues. If the issues persist, you may need to uninstall the software and restart the computer.
If using third-party antivirus software, make sure to exclude your backup location from being scanned. iOS and iPadOS backups contain 10,000s of small files, and real-time virus scanners can significantly slow the backup process as it checks all these files.
- In general, antivirus software is not needed if you are running Microsoft Windows 10 or 11 or recent macOS versions, as the operating system manages threats adequately on its own.
- Even if you have used the same security software for some time on your computer—even successfully alongside iMazing backups—please keep in mind that updates can introduce new issues. If you are experiencing new issues with backups, do not skip the step of trying to disable security software, simply because it wasn’t an issue previously.
- Computer backup software: iMazing backups will be more reliable if they are performed at a different time from any computer backups.
If you schedule backups automatically with your computer, please choose a time that’s different from when you may be backing up an iOS or iPadOS device. This is especially true if the location you are backing your Apple devices to with iMazing is included in your computer backup schedule, which is almost always the case if you’re backing up to a computer’s internal drive.
Backup software can also “lock” the contents of an external drive’s invisible Temp folder, which iMazing uses to store temporary backup files. If this happens, the backup will almost always fail. Popular solutions like Time Machine, Acronis, Carbon Copy Cloner, and Backblaze can all create this circumstance.
Backblaze users should pay special attention to their Backup Schedule, and make sure it is either configured to Only when I click Backup Now or Once Per Day. By default, Backblaze backs up Continuously, which will create issues for local iOS or iPadOS backups.
- Sync software: Data that is synchronized to a device, especially by a third-party during the backup process (using Dropbox or Google Photos, for example), can cause the backup process to restart itself as it attempts to include those newly detected files on the device.
Not using your device during backup and/or placing it in Airplane mode with Wi-Fi disabled can eliminate this conflict.